- Car injector
- Injector cleaning & testing
- 1 Year
- Input voltage
- AC 220V
- Gross weight
- 27 KG
Auto Fuel Injector Cleaner With Cleaning Agent Flow Testing Ultrasonic Cleaner
How to clean the injector?
There are many ways to clean fuel injectors on the market, and the prices are very different.
In the worst case, you need to replace your injector. This is the most expensive solution and the advice of most maintenance technicians. And for different models and brands, the price is not the same. In general, the average price is between $1,000 and $2,000.
The second, relatively inexpensive, is to use our machines to inspect and clean them. Ultrasonic strong cleaning ability to remove stubborn carbon.
When the fuel injector is blocked, carbon deposits gradually form on the surface and inside, and at this time, the fuel flow is reduced during the injection process and the injection mode of the fuel injection is also destroyed. The performance of the engine is also affected by the shape and density of the spray produced by the fuel injector. If the shape and density produced by the injection are not suitable for the operation of the engine, it may cause the engine to idle. In addition, it is possible to cause an acceleration interruption during the acceleration process, thereby causing an insufficient engine power.
Fuel injector cleaner and tester
Intensity of outer magnetic field
1. It can be used for forward and reverse rinsing and ultrasonic cleaning.
2. It can clean 2-6 at a time, and it is practical.
3. The pulse width and speed can be set freely to observe the performance of the injector under different parameters.
4. The oil circuit test can be performed and the engine can be cleaned without interference.
1. Applicable to all car care shops such as 4S shop, auto repair shop, car maintenance center, etc.
2. Small design makes personal business more popular. Customers can put it in the car and go door to door
3. Can work for 2-6 cylinder gasoline vehicles
(1) We have our own R&D team and are capable of producing any sensor based on your mechanical drawings or samples. As long as you need it.
(2) Our raw materials are processed using the most advanced equipment on the market.
(3) We have seven years of sales experience in China and have an in-depth understanding of the market.
(4) Reasonable price and high quality, because we have a wealth of workshop production workers and professional engineers as well as a strong raw material procurement team.
(5) Timely sales through email, telephone and face-to-face sales and after-sales service.
1. Free product leaflets and brochures for customers to use
2. Free technical support for free training for their technicians
3. Free OEM service
4. 24-hour online service